Receiving Faxes - Epson Artisan 835 Quick Manual

3. Press
the fax number (up to 64 digits). Then press
Note:
To redial the last fax number you used, press Redial.
4. Select
Color
Note:
If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select Color.
5. Press
OK
6. Press
x Start
Cancel
y
If you are scanning with the Automatic Document Feeder (see page 7), your
document is automatically scanned and faxed.
If you placed your document on the scanner
glass, you see this screen after the first page is
scanned. If you need to fax additional pages,
place your original on the scanner glass. Press
, then press
Yes
need to fax another page, press
Note:
If the fax number is busy, you see a redialing message and the product redials after
one minute. To redial immediately, press Redial.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the
setting that matches the size of paper you've loaded (press
,
Setup Fax Settings
larger than the paper size you loaded, the fax size is reduced to fit or printed on
multiple pages, depending on the
If you run out of paper during printing, you see the error message
Load more paper and press the
To receive faxes automatically, make sure you see a green light next to
Answer on the screen. The light stays on when Auto Answer mode is enabled. To
)
change the answer mode, press
20
Faxing a Document or Photo
, then use the numeric keypad to enter
or .
B&W
, if desired, to see a summary of your fax transmission settings.
to begin scanning and faxing your document. (To cancel, press
.)
to continue. If you don't
OK
, and
Scan & Print Setup
.
No
). If the incoming fax pages are
Auto Reduction
button to continue.
x Start
(Auto Answer
)
.
OK
Home
setting you select.
Paper out
.
Paper Size
and select
.
(Auto