Network Setup; Wireless Network Setup - Epson Artisan 835 Quick Manual

Network Setup

Make sure you follow the instructions on the Start Here sheet to set up your
product, choose your connection, and install the software. The on-screen
instructions during the installation process help you set up your network
connection. Follow the instructions in this chapter only if you need additional
help:
■
For wireless network setup, see below.
■
For wired network (Ethernet

Wireless Network Setup

The steps in this section provide detailed instructions for setting up your product
on a wireless network.
You will need to install the software on every computer that will print to your
product. Temporary use of a USB cable (not included) is recommended for the
first installation only. After the product is connected to the network, you will be
prompted to remove the USB cable.
If you are using Mac OS X 10.6 or don't have a USB cable, you can use the
buttons on the product to select wireless settings instead.
Note:
If you have trouble setting up your product, see "Solving Problems" on page 50.
■
If this is the first time that you're installing the product, see "Installing for the
First Time" on page 40.
■
If your product is already on your wireless network and you need to set up
additional computers to print to the product, see "Setting Up Additional
Computers" on page 45.
®
) setup, see page 47.
Network Setup
39