Setting Up A Fax Header - Epson Artisan 835 Quick Manual

When you receive a call and Auto Answer mode is turned on, if the other party is a
fax and you pick up the phone or the answering machine answers, the product
automatically begins receiving the transmission. If the other party is a caller, the
phone can be used as normal or a message can be left on the answering machine.
Note:
Your phone or answering machine must be connected to the EXT. port (not to a wall
jack) for your product to detect incoming fax calls properly. The number of rings after
which the product answers must be at least one more than for the answering machine.
To adjust the number of rings, press
Settings, Communication, and then Rings to Answer.

Setting Up a Fax Header

You should create a fax header before sending faxes so that recipients can identify
their origin.
Note:
If you leave the product unplugged for a long period of time, the date and time settings
may not be retained. See the online User's Guide for instructions on setting the date
and time.
Entering Your Sender Name
1. Press
2. Press or
l
3. Press or
l
4. Select
Fax Header
5. Use the keypad to enter the header information
(see page 19). You can enter up to 40 characters
or digits for your name and other contact
information.
6. Press
OK
18
Faxing a Document or Photo
if necessary, then press
Home
and select
Fax Settings
r
and select
Header
r
. You see the fax keypad.
to return to the Header menu.
Home if necessary and select Setup, Fax
or and select
l r
.
.
.
Setup