Table of Contents
Advertisement
User's Guide
x
8. Press the
button.
Note:
Until the fax is sent at the specified time, you cannot send other faxes. To cancel the fax, press the
mode top screen, and then press the
Related Information
"Sending Faxes Using the Control Panel" on page 72
&
"Placing Originals" on page 32
&
"Fax Mode" on page 17
&
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
Therefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
From the home screen, select Fax, and then press the OK button. Set Direct Send to On.
Sending a Fax from a Computer
You can send faxes from the computer by using the FAX Utility and PC-FAX driver. See the help of FAX Utility and
PC-FAX driver for the operating instructions.
Related Information
"PC-FAX Driver (Fax Driver)" on page 102
&
"FAX Utility" on page 102
&
Receiving Faxes
Setting Receiving Mode
You can set Receive Mode using the Fax Setting Wizard. When you set up the fax feature for the first time, we
recommend using the Fax Setting Wizard. If you want to change the Receive Mode settings individually, follow
the steps below.
1. Enter Setup from the home screen.
2. Select Fax Settings > Receive Settings > Receive Mode.
3. Select how to receive.
❏ Auto: Recommended for heavy fax users. The printer automatically receives a fax after the number of rings
you specified.
Important:
c
When you do not connect a telephone to the printer, select the Auto mode.
Faxing
u
button.
74
y
button on the fax
Advertisement
Table of Contents
