Vivax HPS-41CH120AERI/O3 R410a User Manual page 168

Table of Contents

Advertisement

Available languages

Available languages

ENG
 INFORMATION 
 If  DHW  mode  in  holiday  away  mode  is
ON, 
 The disinfect set by user is invalid. 
 If  holiday  away  mode  is  ON,  The  timer
and 
 weekly schedule are invalid except exit. 
 If  the  CURRENT  STATE  is  OFF,  the
HOLIDAY 
 AWAY is OFF. 
 If the CURRENT STATE is ON, the HOLIDAY
 AWAY is ON.
 The  remote  control  doesn't  accept  any
orders when holiday away mode is ON. 
 Disinfecting the unit on 23:00 of the last
day if disinfect is ON. 
 When in holiday away mode, the climate 
 related  curves  previously  set  is  invalid, 
and  the  curves  will  automatically  take 
effect  after  the  holiday  away  mode  is
ends. 
 The preset temperature is invalid when in 
 holiday away mode, but the preset value
still display on the main page. 
Holiday Home 
The holiday home function is used to deviate
from the normal schedules without having to
change them during the holiday at home. 
During your holiday, you can use the holiday
mode to deviate from your normal schedules
without having to change them. 
Period 
Before and 
after your 
holiday 
During your 
holiday 
Value 
Your normal schedules 
will be used 
The configured holiday 
settings will be used 
To activate or deactivate the holiday home
mode: 
Go  to  ''MENU''  >  ''OPTIONS''  >  ''HOLIDAY 
HOME''. 
Press ''OK'' . The following page will appear:
Use ''ON/OFF'' to select ''OFF'' or ''ON'' and 
use  ''◄  '',  ''►  '',  ''▼'',  ''▲''  to  scroll  and 
adjust. 
If the CURRENT STATE is OFF, the HOLIDAY 
HOME is OFF. 
If  the  CURRENT  STATE  is  ON,  the  HOLIDAY 
HOME is ON. 
Use ''▼'', ''▲'' to adjust the date. 
Before and after your holiday, your normal
schedule will be used. 
During  your  holiday,  you  save  energy  and
prevent your house from freezing. 
 INFORMATION 
You have to reset Holiday away or Holiday 
home, if you change the operation mode of 
the unit. 
Beckup Heater 
The  BACKUP  HEATER  function  is  used  to
force  the  backup  heater.  Go  to  ''MENU''  > 
''OPTIONS'' > ''BACKUP HEATER''.  
Press ''OK''. 
Press  ''OK''  .  If  the  HEATER  is  set  NON  in 
''OTHER HEATING SOURCE''. 
The following page will appear: 
23 
-
VIVAX
 

Advertisement

Chapters

Table of Contents
loading

Table of Contents