Fitting The Cover Strips (2-Part Thermal Insulation Jacket); Fitting The 3-Part Thermal Insulation Jacket - Viessmann Vitocell 100-E Installation And Service Instructions For Contractors
Heating water buffer cylinder
Hide thumbs
Also See for Vitocell 100-E:
Table of Contents
Advertisement
Installation sequence
Installation
(cont.)
Fitting the cover strips (2-part thermal insulation jacket)
2.
1.
Fig. 6
Type plate
A
Fitting the 3-part thermal insulation jacket
Note
■
2 people are required for the following work.
■
Ensure that no fleece remnants enter the cylinder
through the cylinder connections.
Clip fasteners on each cylinder side:
1500 l: 6 pce
2000 l: 9 pce
10
Fit the thermal insulation jacket evenly around the cyl-
inder body by patting it.
4.
3.
A
Advertisement
Table of Contents
