Table of Contents
Advertisement
b.
Connect your external dial-up modem or an ISDN modem to the RoamAbout R1
COM port on the back panel.
3.
Connect to a printer: Ensure that you installed the RoamAbout R1 Print Server
located on the CD-ROM. To share a printer between computers, connect it to the
RoamAbout R1 Printer port on the back panel using a standard parallel printer cable.
Or, if your printer already has an Ethernet Card, you can plug it into ports 1, 2 or 3 on
the RoamAbout R1 back panel.
4.
Apply power to the RoamAbout R1: Connect the power adapter to the RoamAbout
R1. Plug the power adapter into the power jack. Verify that the Power LED is on
(green).
Chapter 3
5.
Go to
2-4
set up your computer to configure the RoamAbout R1.
Advertisement
Table of Contents
