Table of Contents
Advertisement
FIXING THE OVEN
Introduce the oven into the furniture opening and fix it with 2 screws (not supplied) as figure 3.
Before fixing the 2 screws, fit the 2 plastic bushes (supplied with the appliance in a separate
kit) into the fixing holes. Take care to fit the bushes in the correct way, they must lie flat.
It is essential that the oven rests on a surface which will support its weight, as the screw
fixing is only complementary.
Note:
It is essential that when installing your oven adequate air circulation is allowed for within
the installation. See figures 1, 2.
Inadequate air circulation may greatly impair the performance of your oven and may effect
adjacent cabinets due to an increase in temperature.
Caution!
Do not lift this oven by the door handle.
Adjust the hinges of furniture doors adjacent to the oven to allow a 4-5 mm gap between
the furniture door and the oven fra me.
Figure 3
9
Advertisement
Table of Contents
