Pioneer VSX-LX504 Instruction Manual page 65

„ 7.1.4 Channel System
bm bl
bk 9
2 1
3
6
4
5
8 7
This is an example of combining the top middle speakers at the front and the
rear high speakers at the rear to the 7.1 Channel System. The height speakers
in front can be selected from following 4 types. The height speakers that can be
combined at the rear differ depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front
( p39)
❏ Combination example when Top Middle Speakers are used at the front
( p41)
❏ Combination example when Front High Speakers are used at the front
p42)
(
❏ Combination example when Dolby Enabled Speakers (Front) are used at the
front ( p45)
Contents
Power amplifier
Connections
≫
"Speaker Setup" settings during Initial Setup (
„
Speaker Setup
7.1.4 ch
Height 1 Speaker Top Middle
Height 2 Speaker Rear High
Zone 2 Preout Zone 2
Speaker Impedance 6 ohms or above
65
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
p183)
• Speaker Channels: 7.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: No
• Zone 2 Preout: Set any value
( p151)
• Bi-Amp: No
• Speaker Impedance: Set any value
p47)
(
≫