Pioneer VSX-LX504 Instruction Manual page 58

„ 5.1.2 Channel System + ZONE SPEAKER (North American models)
MAIN ROOM
8 7
3
2 1
6
5 4
ZONE 2
bk 9
MAIN ROOM: This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of
height speaker. You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example (
❏ Ceiling Speakers Installation Example (
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example (
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
Contents
p23)
p24)
p25)
Connections
≫
58
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p183)
Speaker Setup
5.1.2 ch
Height 1 Speaker
Height 2 Speaker Front High
Zone 2
Zone 2 Preout Zone 2
Speaker Impedance 6 ohms or above
• Speaker Channels: 5.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: Select the type
of height speaker actually installed.
• Zone Speaker: Zone 2
• Zone 2 Preout: Zone 2
• Bi-Amp: No
• Speaker Impedance: Set any
value ( p47)
Setup
To output the video and audio of
the HDMI input to ZONE 2, from
the Home screen, set "System
Setup" - "Input/Output Assign" -
"TV Out/OSD" - "Zone 2 HDMI"
p146) to "Use".
(
≫