Pioneer VSX-LX304-B Instruction Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Stereo Receiver
  5. VSX-LX304-B
  6. Instruction manual

Pioneer VSX-LX304-B Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction
Manual
VSX-LX304
AV RECEIVER
En
Table of contents
Connections
- Connecting Speakers
Playback
Setup
Troubleshooting
Appendix
Supplementary Information
Front Panel≫ Rear Panel≫ Remote≫
≫
≫
≫
≫
≫
≫
≫
≫

Advertisement

Table of Contents
loading

Related Manuals for Pioneer VSX-LX304-B

Summary of Contents for Pioneer VSX-LX304-B

  • Page 1 Instruction ≫ Table of contents Manual ≫ Connections VSX-LX304 ≫ - Connecting Speakers AV RECEIVER ≫ Playback ≫ Setup ≫ Troubleshooting ≫ Appendix ≫ Supplementary Information Front Panel≫ Rear Panel≫ Remote≫...

  • Page 2: Table Of Contents

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box Connecting an AV Component in a Separate Room (Multi-zone Connection) Additional Function (Firmware Update) Connecting a TV (ZONE 2) Update Information of the firmware Connecting a Pre-main Amplifier (ZONE 2) Operation of added new functions Connecting ZONE B Firmware Update Procedure...
  • Page 3 Contents Connections Playback Setup ≫ ≫ ≫ ≫ DTS Play-Fi Playing Sonos on This Unit ® Playing Back Listening To the AM/FM Radio FlareConnect Tuning into a Radio Station Playing Back Presetting a Radio Station USB Storage Device Using RDS (European, Australian and Asian models) 92 Basic Operations Multi-zone Device and Supported Format...
  • Page 4 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setup Web Setup Menu operations System Setup Initial Setup with Auto Start-up Wizard Menu list Operations Menu operations Troubleshooting Input/Output Assign Speaker When the unit is operating erratically Audio Adjust Troubleshooting Appendix Source Hardware Reducing the Power Consumption in Standby State 174...

  • Page 5: What's In The Box

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-974R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6.

  • Page 6: Additional Function (Firmware Update)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one.

  • Page 7: Firmware Update Procedure

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Firmware Update Procedure The update may take approx. 20 minutes to complete via network or via USB Update port. Existing settings are guaranteed in either updating method. 1. Press When this unit is connected to the network, notifications of firmware updates may The Home screen is displayed on the TV screen.
  • Page 8 Contents Connections Playback Setup ≫ ≫ ≫ ≫ If an Error Message is Displayed • If "HDMI CEC" is set to "On", set it to "Off". If an error occurs, "- Error!" is displayed on the display of the unit. ("" –...
  • Page 9 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via the firmware file is for another model. Retry from the download of the firmware USB" with the cursors in order, then press ENTER. file.

  • Page 10: Part Names

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Part Names Front Panel ❏ For details, see ( p11) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 11 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. INPUT SELECTOR dial: Switch the input to be played. 17. TUNER button: Switches the input to be played to "TUNER". Also, pressing 2. FL OFF indicator: Lights up when the display is turned off by repeatedly this button repeatedly switches the input between "AM"...

  • Page 12: Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Display 9 bk 1. This may light when performing operations with the "NET", "USB" input 5. Displays the audio output destination. selector. A: Outputs audio only to ZONE A. 2. Lights in the following conditions. B: Outputs audio only to ZONE B.

  • Page 13: Rear Panel

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Rear Panel 90° 180° ❏ For details, see ( p14) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 14 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. ANTENNA AM LOOP/FM UNBAL 75 Ω terminal: The supplied antennas are connected.

  • Page 15: Remote Controller

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Remote Controller STANDBY/ON button 2. PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions  such as input selector, listening mode, etc. or call the registered settings.  p98)  3. Input selector buttons: Switches the input to be played. ...
  • Page 16 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 21. MODE button: Switches between automatic tuning and manual tuning for AM/FM stations ( p88). Also, when an HDMI CEC function-enabled AV component is connected to this unit, you can switch "4. Play buttons" between "CEC MODE"...

  • Page 17: Connections

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting ZONE B Connecting Antennas Network Connection Connecting External Control Devices Connecting the Power Cord Front Panel≫...

  • Page 18: Connecting Speakers

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment.

  • Page 19: Speaker Installation

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Installation „ 5.1 Channel System This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 20 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System p19) and added surround back speakers. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 21 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( p19) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 22 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, Installation Example and added front high speakers or rear high speakers combined.
  • Page 23 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined. Installing the height speakers will enrich the sound field feeling in the upper space.
  • Page 24 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the basic 5.1 channel system ( p19) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and Installation Example added Dolby enabled speakers (front) or Dolby enabled speakers (surround) combined.
  • Page 25 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1.2 Channel System A 7.1.2 Channel System is a speaker layout consisting of the 7.1 Channel System ( p20) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 26 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the 7.1 channel system ( p20) consisting of front speakers, a center speaker, surround speakers, surround back speakers and Installation Example a powered subwoofer, and added front high speakers or rear high speakers combined.
  • Page 27 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the 7.1 channel system ( p20) consisting of front speakers, a center speaker, surround speakers, surround back speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined.
  • Page 28 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the 7.1 channel system ( p20) consisting of front speakers, a center speaker, surround speakers, surround back speakers and a Installation Example powered subwoofer, and added Dolby enabled speakers (front), Dolby enabled speakers (surround) or Dolby enabled speakers (surround back) combined.
  • Page 29 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.4 Channel System A 5.1.4 Channel System is a speaker layout combining 2 sets of the height speakers, 1 set of left and right at the front and 1 set of left and right at the rear, to the basic 5.1 Channel System ( p19).
  • Page 30 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Top Front (Example 1) Use top rear speakers at the rear Speakers are used at the front About the top front speakers b: 125° to 150° The top rear speakers are installed on the ceiling at rear of the listening position, and the width between the left and right speakers is optimal to match the one for the front speakers.
  • Page 31 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Example 3) Use Dolby Enabled Speakers (Surround) at the rear The Dolby enabled speakers are the special speaker that the sound is emitted toward the ceiling, and have the effect the sound to come from above by reflecting the sound on the ceiling.
  • Page 32 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Top Middle Use rear high speakers at the rear Speakers are used at the front About the top middle speakers 3´ (0.9 m) or more The width between the rear high speakers should match the one for the front speakers, and they should be installed minimum of 3’/0.9 m higher than the front speakers, and tilted so they will point toward the listener.
  • Page 33 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Front High (Example 1) Use rear high speakers at the rear Speakers are used at the front   About the front high speakers   3´ (0.9 m) or more The width between the rear high speakers should match the one for the front 3´...
  • Page 34 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Example 3) Use top rear speakers at the rear     d: 125° to 150° The top rear speakers are installed on the ceiling at rear of the listening position, and the width between the left and right speakers is optimal to match the one for the front speakers.
  • Page 35 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Combination example when Dolby Enabled (Example 1) Use top rear speakers at the rear Speakers (Front) are used at the front About the Dolby enabled speakers (front) c: 125° to 150° The top rear speakers are installed on the ceiling at rear of the listening position, and the width between the left and right speakers is optimal to match the one for the front speakers.
  • Page 36 Contents Connections Playback Setup ≫ ≫ ≫ ≫ (Example 3) Use Dolby Enabled Speakers (Surround) at the rear The Dolby enabled speakers are the special speaker that the sound is emitted toward the ceiling, and have the effect the sound to come from above by reflecting the sound on the ceiling.

  • Page 37: Speaker Connections And "Speaker Setup" Settings

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Connections and "Speaker Setup" Settings Connections „ (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance"...
  • Page 38 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
  • Page 39 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1 ch Height 1 Speaker Height 2 Speaker Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 40 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1 ch Height 1 Speaker Height 2 Speaker Zone 2 Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above...
  • Page 41 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1 ch Height 1 Speaker Height 2 Speaker Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 42 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup Height 1 Speaker Height 2 Speaker Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 43 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup Height 1 Speaker Height 2 Speaker Zone 2 Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 44 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup Height 1 Speaker Height 2 Speaker Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 45 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1.2 ch Height 1 Speaker Front High Height 2 Speaker Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 46 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1.2 ch Height 1 Speaker Height 2 Speaker Front High Zone 2 Zone 2 Preout Zone 2 Speaker Impedance...
  • Page 47 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1.2 ch Height 1 Speaker Height 2 Speaker Front High Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 48 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 7.1.2 ch Height 1 Speaker Front High Height 2 Speaker Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...
  • Page 49 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.4 Channel System "Speaker Setup" settings during „ Initial Setup ( p160) Speaker Setup 5.1.4 ch Height 1 Speaker Top Middle Height 2 Speaker Rear High Zone 2 Preout Zone 2 Speaker Impedance 6 ohms or above •...

  • Page 50: Speaker Combinations

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker combinations • Up to two powered subwoofers can be connected in either combination. ZONE 2 (*1) ZONE 3 (*1) Speaker SURROUND FRONT CENTER SURROUND HEIGHT 1 HEIGHT 2 Bi-AMP (*1) (ZONE (ZONE Channels BACK...

  • Page 51: Connecting The Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit.

  • Page 52: To Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.

  • Page 53: To Non-Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.

  • Page 54: Connecting Playback Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.

  • Page 55: Connecting An Audio Component

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a digital coaxial cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

  • Page 56: Connecting A Video Camera, Etc

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting a Video Camera, etc. Connect a video camera, etc. to the AUX INPUT AUDIO/HDMI jack on the front panel using an HDMI cable or stereo mini plug cable (ø1/8″/3.5 mm). Video camera a HDMI cable Front Panel≫...

  • Page 57: Connecting An Av Component In A Separate Room (Multi-Zone Connection)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).

  • Page 58: Connecting A Pre-Main Amplifier (Zone 2)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting a Pre-main Amplifier (ZONE 2) You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Connect the ZONE 2 PRE/ LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or power amplifier in a separate room with an analog audio cable.

  • Page 59: Connecting Zone B

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting ZONE B Connecting a Pre-main Amplifier, etc. (ZONE B) While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source at the same time with the pre-main amplifier or the transmitter of the wireless headphones connected to the ZONE B LINE OUT jack.

  • Page 60: Connecting Antennas

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. (European, (North American Australian and...

  • Page 61: Network Connection

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the NETWORK jack with the LAN cable as shown in the illustration.

  • Page 62: Connecting External Control Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting External Control Devices IR IN/OUT port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.).

  • Page 63: Trigger Out Jack

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 12V TRIGGER OUT jack When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD player to this unit, the device can be turned on or set to standby by interlocking the operation on this unit.

  • Page 64: Connecting The Power Cord

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. • This unit includes a removable power cord. Be sure to connect the power cord to the AC IN of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.

  • Page 65: Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playback AV Component Playback BLUETOOTH Playback ® Internet Radio Spotify AirPlay ® DTS Play-Fi ® FlareConnect USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Amazon Music Connecting the Sonos System for Playback Listening To the AM/FM Radio Multi-zone...

  • Page 66: Av Component Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "AV Adjust" ( p156) to switch between MAIN and SUB.

  • Page 67: Bluetooth Playback

    If a password is requested, enter "0000". • This unit is displayed as "Pioneer VSX-LX304 XXXXXX". This display can p153) or the Pioneer be changed with the Friendly Name function ( Remote App (can be used with the iOS or Android™).

  • Page 68: Internet Radio

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services, such as TuneIn Radio, etc. • To play Internet radio services, the network needs to be connected to the Internet. •...
  • Page 69 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on the screen.

  • Page 70: Spotify

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Front Panel≫ Rear Panel≫ Remote≫...

  • Page 71: Airplay

    Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on this unit. Next, click the AirPlay icon iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Pioneer VSX-LX304 XXXXXX e.g., iOS 10 Front Panel≫ Rear Panel≫ Remote≫...

  • Page 72: Playing Back On Multiple Devices (Airplay2)

    You can also play the music files on a PC with iTunes (Vere. 12.8 or later) XXXXXX Pioneer VSX-LX304 equipped. Confirm that this unit and the PC are connected to the same network XXXXXXXX Pioneer beforehand. Then, press NET on this unit. Next, click the AirPlay icon...
  • Page 73 "Group playback" that plays the same music in separate • To use a music streaming distribution service, user registration may be rooms at home. To enjoy this function, download Pioneer Music Control App required. (available on iOS or Android™).
  • Page 74 The illustration shows an image. 2. Download Pioneer Remote App from App Store or Google Play™ Store. 3. Connect the mobile device to the network where this unit is connected. 4. Starting up Pioneer Remote App will automatically recognize compatible devices.
  • Page 75 Contents Connections Playback Setup ≫ ≫ ≫ ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2.
  • Page 76 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To return to the previous screen, press • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files.
  • Page 77 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • This unit can use USB storage devices that comply with the USB mass • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz storage class standard.
  • Page 78 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media Player 11 or 12, or NASes ®...
  • Page 79 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 11, Windows Media Player 12, or ®...
  • Page 80 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Depending on the server sharing settings, contents stored on the server Setting PC may not be displayed. 1. Turn on your PC, and start Windows Media Player 12. ® 7. With the cursors, select the music file to play, and then press ENTER to start 2.
  • Page 81 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Depending on the version of Windows Media Player, the names of items to ® select may differ from the above description. ❏ Supported Audio Formats ( p82) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 82 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats This unit supports the following music file formats. Remote play of FLAC and Apple Lossless (.m4a/.mp4/.M4A/.MP4): DSD is not supported. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz •...
  • Page 83 1. Connect this unit to your home network by the network settings on this unit. 2. Download Pioneer Remote App from App Store or Google Play™ Store. 3. Connect the mobile device to the network where this unit is connected.
  • Page 84 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If there are no tracks on the Play Queue list, only "Play Now " is 3. To delete a track, slide the track to the left until the trash icon changes to " ".
  • Page 85 Tap the unit when displayed to select it. selector on the remote controller to display the Network menu and select 5. Tap "NET" or "NETWORK" at the top of the Pioneer Remote App screen, and "Amazon Music" from the menu.
  • Page 86 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Sonos System for Playback Setting Up Once your unit is connected to the Sonos Connect you will be able to send any music or source on your Sonos App to the unit. By going through the Sonos Connect, you can play your unit through other Sonos devices in the network in A setup is required to play Sonos on this unit.
  • Page 87 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Output Zone: With the cursors / , select the ZONE where you want to listen to the music. "Main": Outputs audio only to the main room (where this unit is located). "Zone 2": Outputs audio only to the separate room (ZONE 2). "Main/Zone 2": Outputs audio to both the main room and separate room.
  • Page 88 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1.
  • Page 89 Contents Connections Playback Setup ≫ ≫ ≫ ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p89). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
  • Page 90 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure.
  • Page 91 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Selecting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select a preset number. Deleting a Preset Radio Station 1. Press TUNER. 2. Press the cursors to select the preset number to delete. 3.
  • Page 92 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Using RDS (European, Australian and Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM 3. When a station is found, the station blinks on the display. Pressing the ENTER radio signals.
  • Page 93 "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room. Pioneer Remote App is useful for the multi-zone playback operation. Download Pioneer Remote App (available on iOS or Android™) to a mobile device, such as a smartphone and tablet to use it.
  • Page 94 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back (ZONE 2) In the remote controller operation, while pressing and holding the ZONE 2 SHIFT button on the remote controller, operate with each button. 1. Point the remote controller at the unit, and while pressing and holding the ZONE 2 SHIFT button on the remote controller, press .
  • Page 95 Contents Connections Playback Setup ≫ ≫ ≫ ≫ cable, change the audio output of the AV component to the PCM output. • When video and audio via HDMI input are output to ZONE 2, set "Input/Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p123) to "Use"...
  • Page 96 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back (ZONE 3) In the remote controller operation, while pressing and holding the ZONE 3 SHIFT button on the remote controller, operate with each button. Settings are required to playback a source in ZONE 3. Set "Speaker"...
  • Page 97 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifie, etc. (ZONE B) p59) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1.
  • Page 98 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Convenience functions Using PERSONAL PRESET Registration You can register settings ( p99) such as the current input selector and listening mode with the three PERSONAL PRESET buttons, and call a registered setting in a single operation. e.g.) Pressing the PERSONAL PRESET button will automatically switch the input selector to "TUNER"...
  • Page 99 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Settings that can be registered The following settings can be registered with PERSONAL PRESET. – Input selector (Network service or AM/FM radio stations can also be registered.) – Listening mode – Volume level (Upper limit "-32 dB") (When ZONE 2/ZONE 3 is on, the volume level of ZONE 2/ZONE 3 is also registered.) –...
  • Page 100 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Adjusting the tone Adjusting TREBLE/BASS You can adjust the sound quality of the speakers. 1. Press TONE repeatedly to select Treble or Bass and adjust the content. Treble: Enhances or moderates the high-tone range of the speakers. Bass: Enhances or moderates the low-tone range of the speakers.
  • Page 101 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Adjusting SUBWOOFER Adjust the speaker level of the subwoofer while listening to the sound. 1. Press SW. 2. Press + or - to adjust the level between "-15.0 dB" and "+12.0 dB". •...
  • Page 102 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press SLEEP button on the remote controller to select the time from "30 min", "60 min" and "90 min". "Off": The unit does not automatically enter standby mode.
  • Page 103 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". Selecting a Listening mode • Each of AUTO/DIRECT, SURR, and STEREO buttons stores the listening mode that was selected last.
  • Page 104 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ AUTO/DIRECT button „ SURR button Press repeatedly and the listening modes suited to the input signal are switched By pressing repeatedly you can select the audio format of the signals being input between "Auto Surround", "Direct", and "Pure Direct".
  • Page 105 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Checking the input format and listening mode Pressing repeatedly will switch the display of the main unit in the following order. • The display content for the BLUETOOH input is different. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format...
  • Page 106 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout (ch) Listening mode 2.1.2 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 4.1.4 5.1.4 DD (Dolby Audio - DD) (*1) (*1) (*1)
  • Page 107 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout (ch) Listening mode 2.1.2 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 4.1.4 5.1.4 (*3) (*3) (*3) (*3) (*3) (*3) (*3) ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 (*3) (*3) (*3) (*3) (*3)
  • Page 108 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout (ch) Listening mode 2.1.2 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 4.1.4 5.1.4 (*1) (*1) (*1) (*1) (*1) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*1) (*1) (*1) (*2) (*2) (*2) (*2) (*2) (*2)
  • Page 109 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode Effects Updating of listening modes Atmos „ Listening modes such as Atmos 2.0 and DSur 2.0 are added when the (Firmware version supporting Atmos 2.0, etc.) firmware is updated after purchase or the firmware is switched in the product Since this mode calculates the positional data of audio recorded in Dolby Atmos production process.
  • Page 110 Contents Connections Playback Setup ≫ ≫ ≫ ≫ DD (Dolby Audio - DD) surround channel or height channel is virtually created for expansion playback. „ • This mode cannot be selected when DTS signal is input. This mode faithfully reproduces the sound design recorded in the Dolby Digital According to the speaker layout, the following listening modes are displayed.
  • Page 111 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Drama „ DTS Express Suitable for TV shows produced in a TV studio. This mode enhances the This mode faithfully reproduces the sound design recorded in the DTS Express surround effects to the entire sound to give clarity to voices and create a realistic audio format.
  • Page 112 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ DTS:X „ Ext.Stereo (Extended Stereo) This mode faithfully reproduces the sound design recorded in the DTS:X audio format. This mode is ideal for background music. Stereo sound is played through the The DTS:X audio format is a combination of the mixing method based on surround speakers as well as the front speakers, creating a stereo image.
  • Page 113 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Formats and Selectable Listening Modes „ Selectable listening modes You can select a variety of listening modes Input Format Listening Mode according to the audio format of the signal to be Stereo input.
  • Page 114 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Stereo Stereo Atmos Stereo • You cannot select any Atmos *1 *2 mode other than Pure DSur DSur Classical Direct, Stereo, Ext.
  • Page 115 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Stereo Stereo DTHD Stereo DTHD *1 *2 *1 *2 *3 *1 *2 DSur DSur DSur Classical Classical Classical Unplugged Unplugged Unplugged Ent.Show Ent.Show...
  • Page 116 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Stereo DTS 96/24 Stereo DTS Express Stereo DTS 96/24 DTS Express *1 *2 *1 *2 *1 *2 DTS Neural:X DTS Neural:X DTS Neural:X Classical Classical...
  • Page 117 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Stereo DTS-HD MSTR Stereo DTS-ES Stereo DTS-HD HR DTS-HD MSTR *1 *2 *1 *2 DTS Neural:X DTS Neural:X ES Matrix Classical Classical...
  • Page 118 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode DTS:X Stereo DTS:X Classical Unplugged Ent.Show Drama AdvancedGame Action Rock/Pop Sports Ext.Stereo Ext.Mono F.S.Surround Surround speakers or height speakers need to be installed. A center speaker, surround speakers, or height speakers need to be installed.
  • Page 119 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen • Select "A/a" to switch between upper and lower cases. (Can also be switched such as when inputting a password for Wi-Fi Setup ( p153) or naming a with the MODE button on the remote controller.) preset radio station (...
  • Page 120 Contents Connections Playback Setup ≫ ≫ ≫ ≫ System Setup Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( p122). Input/Output TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
  • Page 121 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Hardware HDMI Change the settings for the HDMI functions. p136 Power Management Change the settings for the power-save function. p137 12V Trigger A Change the settings for 12V TRIGGER OUT A port. p139 12V Trigger B Change the settings for 12V TRIGGER OUT B port.
  • Page 122 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, then select System Setup with the cursors on the remote controller and press ENTER. Select the item with the cursor buttons of the remote controller and press ENTER to confirm your selection.
  • Page 123 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input/Output Assign Setting Item Default Value Setting Details 1080p -> 4K When using a TV that supports 4K, video signals „ TV Out / OSD Upscaling input at 1080p can be automatically upscaled to 4K for output.
  • Page 124 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Digital Audio Input Setting Item Default Value Setting Details Screen Saver 3 minutes Set the time to start the screen saver. Change input assignment between the input selectors and DIGITAL IN COAXIAL/ Select a value from "3 minutes", "5 minutes", OPTICAL jacks.
  • Page 125 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Analog Audio Input Setting Item Default Value Setting Details Set whether to skip the AUX input selector. Select Change input assignment between the input selectors and AUDIO IN jacks. If you "Skip"...
  • Page 126 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ PERSONAL PRESET Information (Zone 2) Confirm the registered contents of 1 to 3 buttons of PERSONAL PRESET. Setting Item Default Value Setting Details The registered settings are displayed in the list. Input Selector Displays the input selector that has been set.
  • Page 127 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Setting Item Default Value Setting Details Height 2 Speaker Rear High Set the speaker type if height speakers are „ Configuration connected to the HEIGHT 2 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", Change the settings of connection environment of the speakers.
  • Page 128 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Crossover Setting Item Default Value Setting Details Zone 2 Preout Zone 2 Set the output destination of the audio that is output Change the settings of crossover frequencies. from the ZONE 2 PRE/LINE OUT or ZONE B LINE OUT terminals.
  • Page 129 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height 2 Small Set the low range capabilities for each channel by Crossover 80Hz When there are speakers that have been set to setting either small or large.
  • Page 130 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Distance Setting Item Default Value Setting Details Surround Left 10.0 ft/3.00 m Specify the distance between each speaker and Set the distance from each speaker to the listening position. the listening position. Setting Item Default Value Setting Details...
  • Page 131 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Channel Level Setting Item Default Value Setting Details Height 2 Right 0.0 dB Select a value between "-12.0 dB" and "+12.0 dB" Adjust the volume level of each speaker. (in 0.5 dB increments). A test tone will be output each time you change the value.
  • Page 132 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Audio Adjust „ Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. „ Dual Mono/Mono Setting Item Default Value Setting Details Change the settings of multiplex audio playback. Dolby Enabled 6.0 ft/1.80 m Set the distance between the Dolby Enabled Speaker to Ceiling Speaker and the ceiling.
  • Page 133 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Dolby „ Volume Change the setting of when Dolby signals are input. Change the Volume settings. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Loudness When playing Dolby TrueHD, enable the dialog Mute Level -∞...
  • Page 134 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Source „ Name Edit Set an easy name for each input. The set name appears on the main unit’s „ Input Volume Absorber display. Select the input selector to make the setting. Adjust the volume level when there are differences in volume level among Setting Item Default Value...
  • Page 135 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Audio Select Setting Item Default Value Setting Details Fixed PCM Select whether to fix input signals to PCM (except Select the priority for input selection when multiple audio sources are connected multi-channel PCM) when you select "HDMI", to one input selector, for example, connections to both the "BD/DVD"...
  • Page 136 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Hardware Setting Item Default Value Setting Details HDMI Standby When this is set to anything other than "Off", „ HDMI Through you can play the video and audio of an HDMI- connected player on the TV even if the unit is in Change the settings of the HDMI function.
  • Page 137 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Power Management Setting Item Default Value Setting Details Audio TV Out You can enjoy audio through the speakers of the Change the settings for the power-save function. TV while this unit is on. "On": When this function is used Setting Item Default Value...
  • Page 138 Pioneer Remote App that can control this unit. • When this function is set to "On", the power...
  • Page 139 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 12V Trigger A Setting Item Default Value Setting Details HDMI 5 Set the 12V trigger output setting to each input. Set when outputting the control signal (maximum 12 V/100 mA) through the 12V "Off": No output TRIGGER OUT A jack.
  • Page 140 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details PHONO Set the 12V trigger output setting to each input. USB REAR Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "PHONO"...
  • Page 141 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 12V Trigger B Setting Item Default Value Setting Details HDMI 5 Set the 12V trigger output setting to each input. Set when outputting the control signal (maximum 12 V/25 mA) through the 12V "Off": No output TRIGGER OUT B jack.
  • Page 142 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details PHONO Set the 12V trigger output setting to each input. USB REAR Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "PHONO"...
  • Page 143 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Works with SONOS Setting Item Default Value Setting Details Output Zone Main Select the zone where you want to listen to the Change the settings to connect with the Sonos Connect. music.
  • Page 144 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Multi Zone „ Zone 3 Change the settings for Zone 3. „ Zone 2 Setting Item Default Value Setting Details Change the settings for Zone 2. Volume Limit Set the maximum value for Zone 3 to avoid too high volume.
  • Page 145 Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are Make the initial setup from the setup menu. installed in the same room. After changing the ID •...
  • Page 146 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Lock Lock the Setup menu so that the settings cannot be changed. Setting Item Default Value Setting Details Setup Parameter Unlocked Lock the Setup menu so that the settings cannot be changed.
  • Page 147 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Advanced MCACC Menu operations Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, then select Advanced MCACC with the cursors on the remote controller and press ENTER.
  • Page 148 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Full Auto MCACC 2. Place the supplied speaker setup microphone in the listening position, and connect to the SETUP MIC jack on the main unit. Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
  • Page 149 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Manual MCACC Setting Item Default Value Setting Details Height 1 Left 0.0 dB After selecting the speaker frequency from between „ EQ Adjust "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB"...
  • Page 150 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height 2 Left 0.0 dB After selecting the speaker frequency from between Surround Right 0.0 dB After selecting the speaker frequency from between "63 Hz"...
  • Page 151 Contents Connections Playback Setup ≫ ≫ ≫ ≫ MCACC Data Check Setting Item Default Value Setting Details Surr Back Left 0.0 dB After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust You can check the number of speaker channels connected and the content and the volume of that frequency between "-12.0 dB"...
  • Page 152 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network/Bluetooth Menu operations Make settings related to network connections and BLUETOOTH. Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Home screen, select Network/ Bluetooth with the cursors on the remote controller, then press ENTER.
  • Page 153 "DHCP" to "Disable" and assign an address Friendly Name Pioneer VSX- Change the device name for this unit which is to this unit in "IP Address" as well as set information related to your LAN, such...
  • Page 154 Default Value Setting Details Setting Item Default Value Setting Details AirPlay Device Pioneer VSX- Change the model name of this unit which is AirPlay Password You can set a password of up to 31 characters so Name LX304 XXXXXX displayed on the AirPlay-connected device to an that only registered users can use AirPlay ®...
  • Page 155 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Bluetooth Setting Item Default Value Setting Details Pairing You can initialize the pairing information saved on Information this unit. Setting Item Default Value Setting Details Pressing ENTER when "Clear" is displayed Bluetooth Select whether or not to use the BLUETOOTH initializes the pairing information stored in this unit.
  • Page 156 Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Adjust Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen while playing something. Press on the remote controller to display the AV Adjust menu. Note that there is no display on the TV screen when the input selector is "CD", "TV", "PHONO", "FM", or "AM", so follow the main unit’s display while doing the operations.
  • Page 157 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Audio „ MCACC Sound Retriever: Improve the quality of the compressed audio. Playback sound MCACC EQ: Enable or disable the equalizer function that corrects for distortion of lossy compressed files such as MP3 will be improved. The setting can be caused by the acoustic environment of the room.
  • Page 158 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet address of this unit. browser on a PC, smartphone, etc. Network Connection: You can select a network connection method. If you select 1.
  • Page 159 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for TV’s REMOTE startup using simple operations following on-screen guidance.
  • Page 160 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 1. Speaker Setup • If you connect a subwoofer, check the power and volume of the subwoofer. Set the subwoofer volume to more than half. 1. Select the connected speaker configuration, and press ENTER. •...
  • Page 161 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 5. Once the measurement is completed, it is possible to perform the "Push Button": If the access point is equipped with an automatic setting measurement in 8 additional listening positions. To perform the measurement, button, you can connect without entering the password.
  • Page 162 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Tuner „ BLUETOOTH function Before starting the procedure „ Network function Problems may be solved by simply turning the power on/off or disconnecting/ „ USB storage device connecting the power cord, which is easier than working on the connection, setting and operating procedure.

  • Page 163: When The Unit Is Operating Erratically

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ When the unit is operating erratically ❏ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the STANDBY/ON button of the main unit for at least 5 seconds, and then restart the unit.

  • Page 164: (This Resets The Unit Settings To The Default)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Resetting the unit (this resets the unit settings to the default) If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem. If the unit is reset, your settings are restored to the default values.

  • Page 165: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Power ❏ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 166 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV with this unit using a digital optical p53) cable.

  • Page 167: X84; Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ The beginning of audio received by an HDMI IN cannot be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately. ❏...

  • Page 168: X84; Video

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. •...
  • Page 169 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Tuner ❏ Poor reception or much noise • Recheck the antenna connection. p60) • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. •...
  • Page 170 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. •...
  • Page 171 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Wireless LAN Network • Unplug and plug the power cords of this unit and the wireless LAN router, check the power-on status of the wireless LAN router, or restart the wireless LAN router. Check the following if the problem persists after you have confirmed the above.
  • Page 172 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Multi-zone function ❏ Cannot ZONE-output the audio of externally connected AV components • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks. If the AV component is not equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable.
  • Page 173 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ The measurement results of Full Auto MCACC show different distances to the speakers from the actual ones • Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "System p130) Setup"...
  • Page 174 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off". –...
  • Page 175 Contents Connections Playback Setup ≫ ≫ ≫ ≫ About HDMI Compatible functions transmitted to the TV. Deep Color: HDMI (High Definition Multimedia Interface) is a digital interface standard for By connecting devices supporting Deep Color, video signals input from the connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other devices can be reproduced on the TV with even more colors.
  • Page 176 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats – 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit) 2 ch linear PCM: – 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×2160p) 50/60Hz : 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit YCbCr4:2:0 (8 bit) Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,...
  • Page 177 Contents Connections Playback Setup ≫ ≫ ≫ ≫ General Specifications „ Amplifier Section Tone Control Characteristics (MAIN) ±10 dB, 20 Hz (BASS) Rated Output Power (FTC) (North American) ±10 dB, 20 kHz (TREBLE) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 100 Tone Control Characteristics (ZONE 2) watts per channel minimum RMS power, with no more than 0.08% total ±10 dB, 100 Hz (BASS)
  • Page 178 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network Section Power Consumption 750 W (North American) Ethernet LAN 760 W (Others) 10BASE-T/100BASE-TX 0.15 W (Full Standby mode) Wireless LAN 1.8 W (Network Standby (wired)) (North American) IEEE 802.11 a/b/g/n/ac standard 2 W (Network Standby (wired)) (Others) (Wi-Fi standard)
  • Page 179 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ HDMI „ Audio Outputs Input Analog IN1 (BD/DVD), IN2 (GAME), IN3 (CBL/SAT), IN4 (STRM BOX), IN5, IN6, ZONE B LINE OUT or ZONE 2 PRE/LINE OUT AUX INPUT HDMI (front) 2 SUBWOOFER PRE OUT Output Speaker Outputs OUT MAIN (ARC), OUT ZONE 2/SUB...
  • Page 180 SN 29403706A_EN © 2019 Onkyo & Pioneer Corporation. All rights reserved. http://pioneer-audiovisual.com/privacy/ "Pioneer" and "MCACC logo" are trademarks of Pioneer Corporation, and are used under license. H1904-1...

This manual is also suitable for:

Vsx-lx304

Table of Contents