Pioneer VSX-LX504 Instruction Manual page 63

„ 5.1.4 Channel System
bk 9
8 7
2 1
3
6
5 4
This is an example of combining the top middle speakers at the front and the rear high speakers at the rear to the 5.1
Channel System. The height speakers in front can be selected from following 4 types. The height speakers that can be
combined at the rear differ depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front (
❏ Combination example when Top Middle Speakers are used at the front (
❏ Combination example when Front High Speakers are used at the front (
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front (
Contents Connections
≫
p31)
p33)
p34)
p36)
63
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p183)
Speaker Setup
5.1.4 ch
Height 1 Speaker Top Middle
Height 2 Speaker Rear High
Zone 2 Preout Zone 2
Speaker Impedance 6 ohms or above
• Speaker Channels: 5.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the
type of height speaker actually
installed.
• Height 2 Speaker: Select the
type of height speaker actually
installed.
• Zone Speaker: No
• Zone 2 Preout: Set any value
p151)
(
• Bi-Amp: No
• Speaker Impedance: Set any
value ( p47)
≫