Pioneer VSX-LX504 Instruction Manual page 119

• If you turn the unit to standby during multi-zone playback, the Z3 indicator is
dimmed, and the playback mode is switched to playback in a separate room
only. Setting ZONE 3 to on while the unit is in standby also switches the
playback mode to playback in a separate room only.
• For ZONE 3 output, audio from externally connected AV components can be
output only when it is an analog audio signal.
• DSD audio signals cannot be output to ZONE 3 when selected with the "NET"
or "USB" input selector.
• If ZONE 3 is on, power consumption during standby will increase.
To set the function to off: While pressing and holding ZONE 3 SHIFT button,
press . Alternatively, press the ZONE 3 ON/OFF button on the main unit.
Contents Connections
≫
119
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫