Table of Contents
Advertisement
INSTALLING THE BACKSTOP
1. Position the backstop against the
belt frame so that the slot aligns
with threaded hole in frame.
2. Secure the backstop to frame with
2 x socket head screws, washers as
shown. Do not overtighten.
• The gap between the sanding
belt and the backstop should
be no more than 2mm.
ATTACHING A DUST COLLECTION HOSE
This sander is equipped with a 2½" (60
mm) diameter dust port that can be
connected to a vacuum or dust-
collection system.
1. Place a 2½" ID diameter hose over
the dust port.
Secure hose in place with a hose
clamp.
8
Advertisement
Table of Contents
