Onkyo TX-NR797 Instruction Manual page 79

Playing Back
TV's REMOTE
Inputs
INPUT
TV
HDMI 1
HDMI 2
HDMI 3
The illustration shows an image.
Contents Connections
≫
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Start the server (Windows Media
NAS device) containing the music files to play.
3. Make sure that the PC or NAS is properly connected to the same network as
this unit.
4. Press NET to display the network service list screen.
• If the "NET" indicator on the display blinks, the unit is not properly
connected to the network. Check the connection.
5. With the cursors, select "Music Server", and then press ENTER.
NET
79
Front Panel≫ Rear Panel≫ Remote≫
Playback
≫ ≫
Player 11, Windows Media Player 12, or
® ®
/ / /
ENTER
Setup
≫