Trigger Out Jack - Onkyo TX-NR797 Instruction Manual

Contents Connections Playback Setup
≫ ≫ ≫ ≫
12V TRIGGER OUT jack
When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD
player to this unit, the device can be turned on or set to standby by interlocking
the operation on this unit. When any input is selected, this unit outputs a
maximum of 12 V/100 mA control signal from the 12V TRIGGER OUT jack, and
controls the power link operation of the external device.
• For connection, use a monaural mini plug cable (ø1/8"/3.5 mm) without
resistance. Do not use a stereo mini plug cable.
a
BD/DVD
a Monaural mini plug cable (ø1/8"/3.5 mm)
63
Front Panel≫ Rear Panel≫ Remote≫