Kohler KD45V20 Operation And Maintenance Manual page 72

Operating fluids and maintenance
Maintenance activities
72
Replacing the oil filter
Fig. 53: Oil filter
u Loosen the oil filter 1 with a strap wrench or similar tool and unscrew.
CAUTION
Hot engine oil!
Risk of burns! Can cause injuries.
u Avoid skin contact with the engine oil.
u Wear protective gloves when changing the engine oil.
u Dispose of oil filter (observe country-specific regulations).
u Oil seal on the oil filter. (Use engine oil.)
u Screw on new oil filter 1 until the sealing contacts the oil module.
u Tighten oil filter 1 by hand 1/2 of a revolution.
w Torque 25 Nm.
© 2018 by Kohler Co. All rights reserved.
Operation and Maintenance Manual
KD45V20 33521030001_4_1 en 2018-08-01