Connecting A Smartphone , T - Motorola MG7540 User Manual

Connecting Devices to Your Cable Modem/Router
You can connect computers, smartphones, tablets, game consoles, security
cameras, streaming media devices (like Roku, Chromecast & AppleTV),
Internet-enabled HDTVs and other devices to your cable modem/router.
You can connect these devices either with an Ethernet cable (a wired connection),
or via Wi-Fi (a wireless connection).
An Ethernet connection is normally a faster, more reliable connection than a
wireless connection. To make an Ethernet connection, you need a device with an
Ethernet connector and a cable to connect between that device and your cable
modem. In some cases, this may be impossible because of the location of the
devices. In those cases, or if the device doesn't have an Ethernet connector, you
will need to create a wireless connection as described below.
Connecting a Device via Ethernet
To make the connection at the Ethernet-capable device, simply plug in one end of
the Ethernet cable to an Ethernet jack on the device. At the cable modem, plug
the other end of the cable into any of the cable modem's LAN jacks. You can
connect up to four devices by using the four LAN jacks.
Connecting a Smartphone, Tablet or Other Wireless Device
via Wireless
You will need to enter one or both of your wireless network names (SSIDs) and