Connecting Your Devices - Motorola MD1600 Quick Start Manual

Connecting Your Devices

WiFi Wireless
You can connect any of your WiFi devices by first going into
the WiFi setup section for the device. Then use the WiFi
SSID/Network Name and WiFi Password/Key printed on the
label on the bottom of the MD1600 router.
Wired
You can also connect up to four HDTVs, computers, game
stations, or other devices by connecting an Ethernet cable
between an Ethernet or LAN port of the device and any one of
the LAN jacks on the router.
Once you've set up WiFi and/or plugged in up to four Ethernet
devices, try to browse the Web. If browsing works,
Congratulations! Your MD1600 is working. If your MD1600 is
NOT working, see Troubleshooting Tips.
Installing a DSL Filter
If a phone, answering machine, or other device is connected to
your DSL modem's phone line, they can interfere with each
other. To prevent this, you need to connect a DSL filter to all
devices EXCEPT your DSL modem.
If you want to use the same phone jack for your MD1600 and a
phone, plug the included DSL filter/splitter's LINE jack into the
phone jack in the wall, plug the supplied phone cord between
the MD1600's DSL jack and the filter's MODEM jack, and plug
the phone into the filter's PHONE jack.
For a phone that does not share the same phone jack with the
MD1600, plug the filter's LINE jack into the phone jack in the
wall and plug the phone into the filter's PHONE jack. If there is
a DSL jack, leave it open.