Connecting A Smartphone , T; D Evice Via W Ireless - Motorola MG7550 User Manual

Connecting a Smartphone, Tablet or Other Wireless
Device via Wireless
You will need to enter one or both of your wireless network names (SSIDs)
and passwords into each client device that you want to connect to your
network. Typically, you should enter SSIDs and Passwords for both the 2.4
and 5 GHz bands into client devices that support both bands. If you haven't
changed the factory settings, you can find these on a label on the bottom of
your modem's stand. If you have changed the network names and/or
passwords, use your new values. (See Chapter 8 if you want to change your
wireless settings).
If you want to connect devices to a Guest Network, use the Network Name
and Password for that network. (See Chapter 8 if you want to set up a Guest
Network).
Wireless devices vary, but they all have a Wireless Settings area. There you
should first select the wireless network you want, namely the wireless
network name or Guest network name of the MG7550. Now enter the
password for your wireless network. Make sure to turn wireless ON on your
client devices. Normally that's all you need to do.