Connecting Your Digital Voice Modem
Rear Panel Description
The SBV6120 rear panel contains all cabling and power connectors.
Item
Description
Provide VoIP connections for up to two telephone lines.
Tel 1/2
Tel 2
Ethernet
Provides a connection to Ethernet-equipped computers using a cable terminated with an RJ-45 connector.
Cable
Provides a connection to the coaxial cable outlet.
Provides power to the digital voice modem.
Power
Cabling
IMPORTANT
•
Before starting this part of the installation, make sure to power off your computer and unplug the power cord to
your digital voice modem.
•
Contact your cable service provider before connecting the Motorola SURFboard Digital Voice Modem to your
existing telephone wiring. Do not connect the telephone cable from the TEL port to a traditional telephone service.
Note: To prevent damage to the SBV6120 Digital Voice Modem
from static electricity, perform each installation step in the
following order:
1 . Connect the coaxial cable to a grounded cable TV outlet or
splitter.
2 . Connect the other end of the coaxial cable to the Cable
connector on the SBV6120.
3 . Insert the power cord plug into an AC electrical outlet.
4 . Connect the power cord to the power adapter and then insert
the power adapter end into the Power connector on the
SBV6120.
SBV6120 Quick Start Guide
1
2
3
4
3