Connecting The Signal Cable - Eizo FlexScan L788-i User Manual

2-2. Connecting the Signal Cable

NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Power Cord
Analog Input
Signal Cable
Signal Cable
(FD-C16 enclosed)
Digital Input
Signal Cable
Signal Cable
(FD-C39 enclosed)
NOTE
The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display
Connector)
Connector
Video Output Connector /
D-Sub mini 15 pin
Input Connector (monitor) /
DVI
Connector
Video Output Connector /
DVI
Input Connector (monitor) /
DVI
PC
Standard graphics card
Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
PC
Digital graphics board
Power Mac G4/G5 (DVI)
2. CABLE CONNECTION
English
13