Optional Inside Push Button (Ipb); User Management - Schlage AD-402 User Manual

• The inside push button (IPB) state is communicated to the access control panel by the
PIM400-485. The manner in which the network access control software utilizes this
communication is configured at the host. The IPB may be used to communicate a lock/
unlock request or be completely ignored by the network software.
• AD-400 IPB activity will only be reported to control systems connected to a PIM400-485
with a RS-485 connection.
• The IPB may be configured by the ACP or SUS to take direct action on the lock state in
case communication from the control system to the AD-400 fails and the lock remains
powered.
User management is controlled by the access control system. If the access control panel has
not yet been connected, use Construction Access Mode to add and delete users.
See Construction access mode on page 6 for more information.
L
For compliance with the UL Standards UL294 and ULCS319, the AD-400/AD-402 must be
connected to an access control panel (ACP) that is UL listed for UL294 for UL installations
and ULCS319 for cUL installations.

Optional inside push button (IPB)

User management

5 • Schlage • AD-400 user guide