Mercedes-Benz CLA Operator's Manual page 59

Hide thumbs Also See for CLA:
Table of Contents

Advertisement

Deactivating t
Deactiv
ating the special seat belt re
he special seat belt retr tract
Press the release button of the seat belt
#
buckle.
Hold the seat belt tongue and guide back to
#
the seat belt outlet.
Inst
Installing a LATC
alling a LATCH-type (ISOFIX) c
H-type (ISOFIX) child r
hild res estr traint
syst
system on t
em on the he le le and r
and right r
ight rear seats
ear seats
Inst
Installing a LATC
alling a LATCH-type (ISOFIX) c
H-type (ISOFIX) child r
hild res estr traint
system on t
syst
em on the he le le and r
and right r
ight rear seats
ear seats
& W W ARNING
ARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back-
rest may fold forwards, even when you are
driving.
As a result, the vehicle occupant will be
R
pushed into the seat belt with increased
force. The seat belt will not be able to pro-
tect as intended and could cause addi-
tional injury.
actor or
Objects or loads in the trunk or cargo
R
compartment will not be restrained by the
seat backrest.
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
aint
If the le and right seat backrests are not
engaged and locked in place, this will be shown
aint
on the display on the instrument cluster.
If the center seat backrest is not engaged and
locked in place, the red lock veri cation indicator
will be visible.
& W W ARNING
ARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system together is excee-
ded.
Too much load may be placed on the LATCH-
type (ISOFIX) child restraint system and the
child may not be restrained correctly in the
event of an accident, for example.
If the child and the child restraint system
#
together weigh more than the permissi-
Occupant safety
ble gross mass of 73 lb (33 kg ), only use
a LATCH-type (ISOFIX) child restraint
system with which the child is secured
with the vehicle seat belt.
Also secure the child restraint system
#
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
In the manufacturer's installation and operat-
R
ing instructions for the child restraint system
used
On a label on the child restraint system, if
R
present
Regularly check that the permissible gross mass
of the child and child restraint system is still com-
plied with.
When installing a child restraint system, observe
the following:
O Always observe the correct use of the seats
and consider their suitability for attaching a
child restraint system.
57 57

Advertisement

Table of Contents
loading

Table of Contents