Mercedes-Benz CLA Operator's Manual page 123

Turn the combination switch to the corre-
#
sponding position 1 - 5.
Single wipe/w Single wipe/washing: ashing: push the button on the
#
combination switch in the direction of arrow
1.
í Single wipe
R
î Wiping with washer uid
R
%
Observe the notes on washing the vehicle in a
car wash ( page 266).
/
R R eplacing t eplacing the windshield wiper blades he windshield wiper blades
& W W ARNING
ARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
Always switch o the windshield wipers
#
and vehicle before changing the wiper
blades.
Moving t Mo ving the wiper ar he wiper arms int ms into t o the r he replacement posi- eplacement posi-
tion tion
Switch the vehicle on and then o again
#
immediately.
Within around 15 seconds, press and hold the
#
î button on the combination switch for
approximately three seconds (
/
The wiper arms will move into the replacement
position.
R R emo emoving t ving the wiper blades he wiper blades
Fold the wiper arms away from the windshield.
#
page 120).
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
far as it will go.
Slide catch 2 in the direction of arrow
#
until it engages in the removal position.
Remove the wiper blade from the wiper arm in
#
the direction of arrow 4.
Light and visibility 121 121
1 as
3