Mercedes-Benz CLA Operator's Manual page 110

108 Seats and stowing 108
opened when the roof luggage rack is
installed.
Position the load on the roof luggage
#
rack in such a way that the vehicle will
not sustain damage even when it is in
motion.
* N N O O TE TE Damage to the panorama roof with
power tilt/sliding panel due to non-
approved roof luggage racks
The panorama roof with power tilt/sliding
panel may be damaged by the roof luggage
rack if you attempt to open it when using a
roof luggage rack not tested and approved for
Mercedes-Benz.
When a roof luggage rack is installed,
#
open the panorama roof with power tilt/
sliding panel only if this has been tested
and approved for Mercedes-Benz.
The panorama roof with power tilt/sliding
panel may be raised to allow ventilation of the
vehicle interior.
* N N O O TE TE Damage to the covers
The covers may be damaged and scratched
when being opened.
Do not use metallic or hard objects.
#
Carefully fold covers 1 upwards in the direc-
#
tion of the arrow.
Secure the roof luggage rack to the fastening
#
points beneath covers 1.
Comply with the installation instructions of the
#
roof luggage rack manufacturer.
Secure the load on the roof luggage rack.
#
Sockets ts Socke
Using t Using the 12 V socket he 12 V socket
R R eq equir uirements: ements:
Only devices up to a maximum of 180 W
R
(15 A) are permissible.
Depending on the vehicle equipment, the vehicle
has the following 12 V sockets:
In the stowage compartment in the front cen-
R
ter console
In the trunk
R