Mercedes-Benz CLA Operator's Manual page 327

Observe the notes on sockets (
R /
Press the start/stop button once to switch on
#
the power supply ( page 130).
/
Press on and o switch 4 on the tire in ation
#
compressor to I I .
The tire in ation compressor is switched on.
The tire is in ated. The tire pressure is shown
on manometer 5.
Pump the tire to the speci ed tire pressure.
#
% The speci ed tire pressure is stated on the
label of the emergency spare wheel.
When the speci ed tire pressure has been
#
reached, press on and o switch
tire in ation compressor to 0 0 .
The tire in ation compressor is switched o .
Press the start/stop button to switch o the
#
power supply.
If the tire pressure is higher than the speci ed
#
pressure, press pressure release valve button
6 until the correct tire pressure has been
reached.
page 108). Unscrew union nut
#
the valve.
Screw the valve cap of the emergency spare
#
wheel onto the valve again.
Store ller hose
#
section of the tire in ation compressor hous-
ing.
Store the tire in ation compressor in the vehi-
#
cle.
4 on the
2 of ller hose 1 from
1 and plug 3 in the lower
Wheels and tires 325 325