Maintenance Schedule - Star Trac CORE HEALTH & FITNESS Owner's Manual

MAINTENANCE SCHEDULE

Some types of PM need to be performed more often than others. The frequency of PM depends a great deal on
the use and environment of the unit. Basic scheduling is shown below, but timeline and PM schedules should
be adapted to the environment and usage that the unit receives. Refer to the console manuals for further
maintenance information on the consoles.
Maintenance Schedule
General Maintenance
Check Safety & Warning Labels
Inspect Pedal Bolts and Crank
Check and tighten all hardware
Check Pedals for damage and movement
Inspect seat for wear
Inspect Pedals
1
Inspect and tighten pedal toe clips and shoe straps
Inspect leveling feet
Check console settings and keypad performance
Inspect welds for any signs of cracking
Check drive assembly for wear
Lubrication
Lubricate horizontal and vertical seat sliders
Lubricate pop-pins
3
Cleaning
Wipe down and clean Bike and Frame
Clean Console
4
Clean and seal frame
5
1 Excessive side-to-side movement or bearing resistance indicates the pedals need to be replaced.
2 Dry film lubricant with PTFE or wet film lubricant with PTFE may be used. These products can be purchased online via bike companies, at bike shops, and at some
hardware stores. Apply a layer using a cloth to clean up excess.
3 "
4 Wipe console with a soft, non-abrasive cloth to remove all sweat after each use. Use a soft, non-abrasive cloth and mild spray cleanser to clean the console. Never
use abrasive cleaning liquids, cleaning liquids with an oil base, ammonia, or alcohol.
5 Use water with a non-abrasive soap, car wash soap, or bike cleaner soap to clean. Wipe with water and dry. Seal with wax or bike polish.
Daily Weekly
X
2
X
X
Every 6
Monthly Months
X
X
X
X
X
X
X
X
X
X
X
X
X
Yearly
Page 29