Saturn ST-FP 0094 К Manual page 24

3. Place the cutting blade on the feed screw with its cutting side out. If the blade is
not installed properly, the meat will not be minced.
4. Place the proper grinding plate in front of the cutting blade, aligning the notches on
the grinding plate with the grooves on the grinder head.
5. Tighten the cap, but do not tighten it excessively.
6. Place the hopper plate on the grinder head and fix it.
7. Set the meat grinder on a flat steady surface.
USE OF THE MEAT GRINDER
1. Separate the meat from the bones, tendons and films and cut them into small
pieces so that they could easily pass through the loading slot.
2. Connect the power cord to the electrical outlet and turn the unit on by pressing
the ON / OFF knob.
3. Put the slices of meat on the hopper plate. Use the pusher to push ingredients
down through the grinder head.
24