Mitsubishi Electric Climaveneta i-BX-004-013M Installation, Operation And Service Manual page 46

CHECKING AND STARTING UP THE UNIT
Warning: before starting, leave power connected to the unit with the compressor off for at least two hours, so as to
preheat the oil in the compressor sump.
The following operating modes can be selected, according to the model:
Heating only*
Heating system and domestic hot water*
Cooling only
Cooling system and domestic hot water*
Domestic hot water only*
Unit off
*i-Bx-N only
Press the button to access the operating settings win-
dow.
Press the button to select the operating mode.
Cooling mode; press the
select heating mode.
Press the button to confirm.
The cursor flashes in domestic hot water mode, only if previ-
ously enabled.
Use the and buttons to enable domestic hot water
production (on/off).
Premere il tasto Press the
46 i-BX-(Y)_i-BX-N-(Y) EN
button on the other hand to
button to confirm.
A