Husqvarna 555 Workshop Manual page 37

7. Remove the air filter holder.
8. Remove the return hose (A) and the suction hose
(B) from the air purge bulb.
A
9. Remove the cable connector (C) from the
connection clamp (D).
Note: Make a note of the position of the return hose
and the wires on the air filter holder.
10. Remove the connection clamp (D) from the bracket
on the carburetor and remove the air filter holder.
1540 - 001 -
11. Disconnect the throttle wire (E).
12. Remove the fuel hose (F).
13. Remove the 2 screws and the bracket.
C
B
D
14. Disconnect the thermostat wires. Disconnect the
generator wires. Remove the heating elements.
E
F
Repair instructions - 37