Husqvarna 555 Workshop Manual page 33

6. Remove the clutch (A), the clutch drum (B), the
bearing (C), the bearing (D) and the worm gear (E).
E
7. Put the centrifugal clutch in a vise.
8. Carefully remove the clutch shoe springs from the
side that does not have text.
9. Assemble in the opposite sequence.
1540 - 001 -
C
B
A
D
7.11.2 To clean and examine the centrifugal clutch
1. Clean and examine the clutch shoe springs (A), the
clutch hub (B) and the clutch shoes (C) carefully.
Replace damaged parts. Always use original spare
parts.
C
2. Measure the diameter of the clutch shoes across the
full clutch hub. Replace the clutch if the thickness is
less than 65 mm.
Min. 65 mm
A
B
Repair instructions - 33