Husqvarna 555 Workshop Manual page 23

5. Remove the heated front handle from the product.
6. Install in the opposite sequence.
7.7.3 To remove and install the heated rear handle
1. Remove the heated front handle, refer to
and install the heated front handle on page 22 .
2. Remove the chain brake, refer to
the chain brake on page 15 .
3. Remove the cylinder cover.
4. Remove the air filter.
5. Remove the air filter holder and the carburetor, refer
To remove and install the carburetor on page 36 .
to
6. Remove the chain catcher.
1540 - 001 -
7. Loosen the screw to the vibration damping system.
8. Loosen the deflection limiter.
To remove
To disassemble
Repair instructions - 23