Husqvarna 555 Workshop Manual page 22

7.7.2 To remove and install the heated front handle
1. Remove the 2 screws and the cover for the heated
front handle.
2. Remove the switch (A) from the contact plate (B).
Disconnect the wire (C) from the connection plate.
Disconnect the handle wire (D) from the contact
plate. Remove the contact plate (B). Disconnect the
stator wire (E) and the carburetor wire (F) from the
wire (G). Disconnect the ground cable (H) from the
heated front handle.
G
E
H
22 - Repair instructions
C
B
A
D
F
3. Remove the 2 screws.
4. Remove the 2 screws.
1540 - 001 -