True Fitness TE900 Owner's Manual page 20

CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
Step 4 Hand Grip Assemblies:
Connect the wire coming from the bottom of the Contact Heart Rate (CHR) grip assembly to the
a)
corresponding wire located in the pedestal arm as shown.
Secure each CHR grip assembly to the pedestal arm with four screws and four lock washers.
b)
Note: Confirm each grip assembly is assembled on the correct pedestal using the left and right orientation
stickers on them.
Truefitness.com / 800.426.6570 / 636.272.7100
16