Printing From A Cloud Connector Profile; Printing A Font Sample List; Placing Separator Sheets Between Copies; Canceling A Print Job - Lexmark XM1342 User Manual

Print
Printing from a Cloud Connector profile
1
From the home screen, touch Cloud Connector.
2
Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector profile, see
profile" on page 49.
3
Touch Print, and then select a file.
If necessary, change the settings.
Note: Make sure to select a supported file.
4
Print the document.

Printing a font sample list

1
From the home screen, touch Settings > Reports > Print > Print Fonts.
2
Touch PCL Fonts or PostScript Fonts.

Placing separator sheets between copies

1
From the home screen, touch Settings > Print > Layout > Separator Sheets > Between Copies.
2
Print the document.

Canceling a print job

From the printer control panel
1
From the home screen, touch Cancel Job.
2
Select a job to cancel.
From the computer
1
Depending on the operating system, do either of the following:
•
Open the printers folder, and then select your printer.
•
From the System Preferences in the Apple menu, navigate to your printer, and then open the print queue.
2
Select a job to cancel.

Adjusting toner darkness

1
From the home screen, touch Settings > Print > Quality > Toner Darkness.
2
Select a setting.
"Creating a Cloud Connector
57