Table of Contents
Advertisement
Dimensions
Note: All units are in millimeters unless otherwise indicated.
K3FP-SL-UI
36
Limit Value Switch
93.1
102.5
K3FP-SL-UI
Note: 1. Use solid wire with a diameter
of 2.5 mm
terminals with insulation
6.2
sleeves for terminal
connections.
To preserve dielectric strength
after connection, the length of
the exposed conductive part
inserted into the terminal must
be 12 mm max.
2
For 2.5-mm
(max.)
solid wire:
12 mm max.
2. Screw Tightening Torque
Recommended torque:
0.5 N·m
2
max. or bar
For bar terminals with
insulation sleeves:
12 mm max.
Advertisement
Table of Contents
