Omron K3FP Series Manual page 2

Applications
Install in Limited Space
K3FP
Series
This ultra-slim 6.2-mm Signal Converter can be installed in limited
space, such as where expansion is required, and help to reduce the
overall size of devices.
Reduces Spare Parts
K3FP-VS-UI-UI
3-Way Signal Isolator
Input and output ranges are
set using a DIP switch on
the side of the Unit.
Input signal
0 to 10 V DC
2 to 10 V DC
0 to 5 V DC
1 to 5 V DC
0 to 20 mA DC
4 to 20 mA DC
Isolated Duplicate Signal Output
K3FP-VS-UI-2I
Dual Output 3-Way Signal Isolator
Input signal
0 to 20 mA DC,
4 to 20 mA DC,
0 to 10 V DC,
1 to 5 V DC
(switch using
DIP switch)
2
Ultra-slim Signal Converter
Width: Just 6.2 mm.
Page 6
Output signal
0 to 10 V DC
2 to 10 V DC
0 to 5 V DC
1 to 5 V DC
0 to 20 mA DC
4 to 20 mA DC
Page 10
Digital Panel Meter
4 to 20 mA DC
4 to 20 mA DC
Data Logger
K3FP Series
Isolators That Do Not Require Power Supply
K3FP-SN1-I-I
One-channel Passive Loop-powered Isolator
K3FP-SN2-I-I
Two-channel Passive Loop-powered Isolator
The input signal provides power for the Isolator, so power supply
capacity does not need to be considered when expanding Units:
No power line wiring is required.
External device
Field device
Three- and four-conductor RTD Transducers
K3FP-RS-UI
RTD Transducer
Select the number of conductors for the input platinum resistance
thermometer using the DIP switch on the side of the Unit.
Set any input range from −150°C to 850°C.
Limit Value Switches
K3FP-SL-UI
Limit Value Switch
Consider the following products for judging non-DC
Note:
signal inputs.
For AC current single-phase signal inputs: K8AB-AS
For AC voltage single-phase signal inputs:
K8AB-VS/K8AB-VW
For AC voltage three-phase signal inputs: K8AB-PW
For thermocouple and platinum resistance
thermometer sensor inputs: K8AB-TH
For details, refer to Measuring and Monitoring Relays K8AB Series/
61F-D21T (Cat. No.: N141).
Page 14
Page 14
Page 23
2-conductor 3-conductor 4-conductor
PT100 PT100 PT100
Page 33
Alarm
indicator