3Ware 9550SX-4LP User Manual page 95

The Summary page appears after you first logon to 3DM, and when you click
the Summary link in the menu bar.
The Summary page provides basic information about each 3ware RAID
controller in your system. To see details about the units in a controller, click
the link in the ID column.
. The ID that the operating system assigns to the controller.
ID
Model.
on a sticker on the outside bracket of the controller.)
Serial #.
printed on a sticker on the outside bracket of the controller.)
Firmware.
Driver.
Status.
Warning, Error, and No Units.
currently being performed (rebuilding, migrating, or initializing).
indicates that a unit is degraded or inoperable. If both Error and Warning
conditions exist, the status will appear as Error.
www.3ware.com
Note: The software version shown in the screenshots in this
manual are preliminary examples only. For the current released and
tested version number, refer to the 9000 release notes.
The controller ID you see in 3DM 2 may not match the
Note:
number that you see for the same controller in 3DM version 1.x.
The model name of the controller. (The model number is also printed
The serial number of the controller. (The serial number is also
The firmware version running on the controller.
The driver version being used to interact with the controller.
The overall status of the controller. Possible statuses include OK,
Warning
3DM 2 Reference
indicates that a background task is
Error
85