3Ware 9550SX-4LP User Manual page 123

3DM 2 Reference
alarms, passwords, page refresh frequency, whether remote access is
permitted, and the incoming port for 3DM to listen for requests.
The initial settings for most of these preferences are specified during
installation of 3DM.
E-mail Notification
Use the fields in this section to set up and manage notifications of events by e-
mail.
This field determines whether e-mail notification is or
Send E-mail. Enabled
Disabled .
Specifies the type of events for which notifications should be sent.
Notify On.
A severity of Information will send e-mails for all alarms, a severity of
will send e-mail for alarms with severity of Warning and Error. A
Warning
severity of Error will send e-mail for alarms with severity of Error.
Enter the email address which will appear in the "From" field.
Sender.
The e-mail address to which notifications should be sent. You can
Recipient.
enter multiple addresses, separated by commas (,).
If the machine on which you are running 3DM has
Mail Server (name or IP).
access to a name server, you may enter the machine name of the mail server in
the Server field. Otherwise, use the IP address.
Saves the e-mail notification settings.
Save E-mail Settings button.
Send Test Message button. Sends a test message using the saved e-mail
settings.
Password
Use the fields in this section to set the passwords for the User and
Administrator. When 3DM is first installed, the default password for both is
.
3ware
Change Password For. Select the access level for which you are setting the
password: or . Users can only view status information in
User Administrator
3DM, while Administrators can make changes and administer the controller
and associated drives.
Current Password. Enter the current password.
New Password. Enter the new password.
Enter the new password a second time, to be sure
Confirm New Password.
you have entered it correctly.
Change Password button. Saves password changes.
www.3ware.com 113