3Ware 9550SX-4LP User Manual page 144

Chapter 8. Configuring Units
When you select a drive, an asterisk appears next to it in the left most
column (see Figure 56).
Tip:
Figure 56. Asterisks Next to Selected Drives
2 After all drives for the unit are selected,
press
Tip:
3 On the
listed (see Figure 57 for an example for RAID 5).
Figure 57. Create Disk Array Display
4 (Optional) Press
again to set the name.
134
If you want to use all available drives, press
.
Enter
You can also press
Alt-C
3ware Disk Array screen, make sure that the proper drives are
Enter and type a name for the unit; then press
3ware Serial ATA RAID Controller User Guide
Alt-A
Tab to the Create Unit
to choose Create Unit.
to select them all.
button and
Enter