Rebuilding Units Through 3Bm - 3Ware 9550SX-4LP User Manual

5 If the degraded unit has more than one degraded drive (for example, a
RAID 10 where both mirrored pairs each have a degraded drive), repeat
steps 3 and 4.
If rebuild scheduling is not enabled on the
process begins almost immediately in the background. If rebuild
scheduling is enabled, the unit will not start actively rebuilding until the
next scheduled time.

Rebuilding Units through 3BM

When a RAID unit becomes degraded, it is marked as such, and the drive(s)
that failed are marked as
Figure 71, shows an example of how a degraded RAID 5 unit appears in
3BM.
Figure 71. Degraded RAID 5 Array to be Rebuilt
You can start the rebuild of a degraded unit manually in 3BM, or you can let
the system boot and allow the rebuild to take place automatically.
www.3ware.com
Note: If you need to cancel a rebuild, you can do so by using the
link on the Maintenance page to remove the drive
Remove Drive
from the unit.
Not In Use
page, the rebuild
Scheduling
in the 3BM screens.
Rebuilding Units
191