Lexmark M1342 User Manual page 55

Use printer menus
Menu item
IPv6
Manually Assigned IPV6 Router
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off*
Mac Binary PS
Auto*
On
Off
Wi‑Fi Direct
Menu item
Enable Wi‑Fi Direct
On
Off*
Wi‑Fi Direct Name
Wi‑Fi Direct Password
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Assign the IPv6 router address.
Note: This menu item appears only in some printer models.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
View the network addresses.
Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Set the printer to switch automatically to PS emulation when a print
job requires it, regardless of the default printer language.
Notes:
•
This menu item appears only in some printer models.
•
If PS SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified
in the Setup menu.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
This menu item appears only in some printer models.
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Description
Set the printer to connect directly to Wi-Fi devices.
Specify the name of the Wi‑Fi Direct network.
Set the password to authenticate and validate users on a Wi‑Fi connection.
55