License Plate Light; Dome Light - Subaru 2007 Legacy Owner's Manual

11-56
Maintenance and service
and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise. Install the light cover on the
rear gate.
& License plate light
! Sedan
It may be difficult to replace the bulbs.
Have your SUBARU dealer replace the
bulbs if necessary.
! Station wagon
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.
& Dome light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.