Channel And Category Selection - Subaru 2007 Legacy Owner's Manual

& Channel and category selec-
tion
! Channel selection
Press " " of the TUNE TRACK button to
select the next channel and press "
the button to select the previous channel.
Keep pressing " " of the button to
change to the next channel continuously
and keep pressing " " of the button to
change to the previous channel continu-
ously.
! Category selection
Press " " of the FOLDER/CATEGORY
button to select the next category and
press " " of the button to select the
previous category.
" of
Audio
! Channel scan
Press the " " side of the SEEK/SCAN
button to change the radio to the SCAN
mode. In this mode, the radio scans
through the channel until a station is
found. The radio will stop at the station
for five seconds while displaying the
channel number, after which scanning will
continue until the entire channel has been
scanned from the low end to the high end.
Press the " " side of the button again to
cancel the SCAN mode and to stop on any
displayed channel.
– CONTINUED –
5-13