Light Control Switch; Headlights; High/Low Beam Change (Dimmer) - Subaru 2007 Legacy Owner's Manual

Light control switch

WARNING
To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the "ON" position. In any other
position, the vehicle's lights will be
out.
If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.
The light switch operates only when the
ignition switch is in the "ON" position.
& Headlights
To turn on the headlights, turn the knob on
the end of the turn signal lever.
first position
Parking lights, instrument panel illumina-
tion, tail lights and license plate light are
on.
second position
Headlights, parking lights, instrument pa-
nel illumination, tail lights, and license
plate light are on.
Instruments and controls
& High/low beam change (dim-
mer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light " " on the instru-
ment panel is also on.
To switch back to low beam, pull the lever
back to the detent position.
– CONTINUED –
3-39