Subaru 2007 Legacy Owner's Manual page 180

4-10
Climate control
the air conditioner compressor turns on,
air flow is directed towards the windshield
and front door windows, and the indicator
light on the button comes on.
After eliminating the fogging from the
windshield, return the climate control
system to the AUTO mode by pushing
the "AUTO" button or turn off by pushing
the "OFF" button.
Alternatively, push the "
to return the system to the setting that was
selected before you activated the defros-
ter.
! Fan speed control button
The fan speed control button has 6
different fan speed positions.
The fan speed is shown by the display.
! A/C – Air conditioner button
" button again
If the windshield starts to fog when the
climate control system is operated in the
AUTO mode, push the air conditioner
button "A/C" to defog and dehumidify.
When this button is pushed, the air
conditioner compressor turns on and the
indicator light "A/C" on the display comes
on. After eliminating the fogging from the
windshield, set the system back to the
AUTO mode by pushing the "AUTO"
button.
NOTE
The air conditioner compressor does
not operate when the outside air tem-
perature is below 328F (08C).
! Air flow mode selection button
Select the desired air flow mode by
pushing the air flow mode selection
button. The selected air flow mode is
shown by the display.
(Ventilation): Air flows through the
instrument panel outlets.
(Bi-level): Air flows through the instru-
ment panel outlets and the foot outlets.
(Heat): Air flows through the instrument
panel outlets, the foot outlets, and some
through the windshield defroster outlets.
(Heat-def): Air flows through the instru-
ment panel outlets, the windshield defros-
ter outlets, and the foot outlets.