Seat Heater (If Equipped) - Subaru 2004 Forester Owner's Manual

Seat, seatbelt and SRS airbags

Seat heater (if equipped)

HI — Rapid heating
LO – Normal heating
The seat heater operates when the ignition switch is
either in the "ACC" or "ON" position.
To turn on the seat heater, push the "LO" or "HI" posi-
tion on the switch, as desired, depending on the tem-
perature. Selecting the "HI" position will cause the seat
to heat up quicker.
The indicator located on the switch comes on when
the seat heater is in operation. When the vehicle's in-
1-8
terior is warmed enough or before you leave the vehi-
cle, be sure to turn the switch off.
There is a possibility that people with delicate
skin may suffer slight burns even at low tem-
peratures if he/she uses the seat heater for a
long period of time. When using the heater, al-
ways be sure to warn the persons concerned.
Do not put anything on the seat which insu-
lates against heat, such as a blanket, cushion,
or similar items. This may cause the seat heater
to overheat.
US1507BB
NOTE
Use of the seat heater for a long period of time
while the engine is not running can cause battery
discharge.
When cleaning the seat, do not use benzine,
paint thinner, or any similar materials.