Subaru 2004 Forester Owner's Manual page 362

Hide thumbs Also See for 2004 Forester:

Table of Contents

Guideline of coolant quantity (including coolant in reservoir

Non-turbo models:

MT. 7.3 US qt (6.9 liters, 6.1 Imp qt)

AT. 7.2 US qt (6.8 liters, 6.0 Imp qt)

Turbo models:

MT. 7.8 US qt (7.4 liters, 6.5 Imp qt)

AT. 7.7 US qt (7.3 liters, 6.4 Imp qt)

1) "FULL" level mark

2) "LOW" level mark

6. Pour the coolant and fill to the reservoir tank's

"FULL" level mark.

Be careful not to spill engine coolant when

adding it. If coolant touches the exhaust pipe, it

may cause a bad smell, smoke, and/or a fire.

Do not splash the engine coolant over paint-

ed parts. The alcohol contained in the engine

coolant may damage the paint surface.

1) Rubber gaskets

7. Put the radiator cap back on and tighten firmly. At

this time, make sure that the rubber gasket in the radi-

Maintenance and service

– CONTINUED –

Chapters

Table of Contents