Subaru 2004 Forester Owner's Manual page 119

Keys and doors
2
1) Connector for SRS airbag system (yellow)
2) White (1P)
2. Connect the white (1 pole) connector.
3. Turn the ignition switch from the "LOCK" to the
"ON" position.
4. Install the side sill cover.
To place the system in active arming mode (remote re-
quired for activation), disconnect the white connector.
Do not disconnect or tamper with any yellow
connector and/or any harness covered with yel-
2-18
low insulation and/or tape.
Doing so could result in accidental inflation of
the SRS airbag or could make the SRS airbag
system inoperative, which may result in serious
injury.
1
1. Turn the ignition switch to the "ON" position.
HS2023BB
1) ON
2) LOCK
2. Turn the ignition switch from "ON" to "LOCK" posi-
tion and remove the key from the ignition switch.
Arming the system
1
1
2
2
HS2024BB